Terminal Application Demo
This demo utilizes the EM1000-TEV and works as a data collection terminal, or more specifically, a time recorder. The IDs used for access are punched in using the keypad, though this can be easily changed to using a card reader.
The user can setup the date/time, network settings, terminal info, and more through a built-in menu system or using a web interface. The system also keeps an event log that can be checked through the web interface.
The system comes with default settings which can be loaded using the "Initialize" option. The event log is saved in the internal flash disk for future access. The terminal also supports basic setting setup with DS Manager and Out-of-band / serial programming.
This demo works with two LCD types:
- Winstar WG12864F Black/White LCD panel with SAMSUNG S6B0108 controller (LB0)
- Ampire AM176220 TFT panel with HIMAX HX8309 controller (LB2).
It is recommended that you initialize the system (reset to factory default values) the first time you power it up. This can be done through the terminal menu, web interface, DS Manager or through the Frimware Command issued through UDP or serial port. Below, we will provide a simple guide on how to operate the demo program once it is loaded into the EM1000-TEV.
Terminal Interface
Note: The E and C keys serve the same purpose throughout the program: Enter and Cancel/Clear
Main Screen:
The main screen is the default screen when powered up. This is where you enter in the ID number and select if you are punching in or out. You can also access the main menu from this screen.
Keys:
- F1: Punch in
- F2: Punch out
- F3: Enter
- F4: Main Menu
- E: Enter
- C: Clear (ID Entered)
- 0-9: Numeric keys (for entering user ID)
Main Menu:
- Setup: Go into the system setup menu
- Reboot: Reboot the system
- Initialize: Return to default settings
- Clear Log: Clear the access log
Keys:
- F1: Cancel / Exit
- F2: Navigate Up
- F3: Navigate Down
- F4: Enter
- E: Enter
- C: Cancel / Exit
Setup Menu:
- Network: Setup DHCP, IP Address, Gateway IP and Netmask (subnet mask)
- Date/Time: Setup of Timer Server IP, Auto Sync, Date, Time and Time Zone
- Owner Name: To enter a name with letters (and not just numbers), use the Web Interface.
- Device Name: To enter a name with letters (and not just numbers), use the Web Interface.
Keys:
- F1: Cancel / Exit
- F2: Navigate Up
- F3: Navigate Down
- F4: Enter
- E: Enter
- C: Cancel / Exit
- 0-9: numeric keys
Web Interface
The pages offer the same functionality as the terminal interface, you can access all the available settings to make adjustments and be able to browse through the event log.
Login Page: The default password is "admin" 
General Settings: Owner Name, Device Name and Password 
Network Settings: DHCP, IP Address, Gateway IP and Netmask 
Date/Time Settings: Date, Time, Time Server IP, Auto Sync and Time Zone 
Event Log: Access to event history and ability to perform search 
Get It Now
|
