Tibbo technology - the Home of Advanced Serial Device Servers
Serial Device Servers
Site search    Login help

Login: 

Password: 

Home Products Taiko Aggregate Downloads Support Order Register Contacts Jobs International

Programmable

External Devices:

Boards:

Internal Modules:

Serial-over-IP (SoI)

External Devices:

Internal Modules:

Dual-Use (Programmable/SoI)

External Devices:

Internal Modules:

Other Devices:

Software:

Kits and Accessories:

 border=

 border=
Find:
Area:
 
 border=


CURRENTLY NOT AVAILABLE.



Introduction

Very compact and highly integrated, the EM202 Ethernet module features built-in Ethernet magnetics, RJ45 connector, and even four status LEDs! While being a true one-component Ethernet solution, the EM202 has a board footprint just slightly bigger than that of a regular RJ45 connector.

The EM202 is a dual-use device: depending on the loaded firmware it can work as a fixed-function, ready-to-run serial-to-Ethernet converter (default) or BASIC-programmable module.

As a serial-to-Ethernet converter, the EM202 allows you to quickly network-enable practically any serial device.

As a BASIC-programmable controller, the EM202 offers a low-cost, rapid development alternative to expensive and complex computing platforms, such as LINUX-based boards.


Hardware Features

  • Compact, dimensions only 32.3x19x16mm.
  • Power consumption: 230mA@5VDC.
  • One 100BaseT Ethernet port
  • Built-in magnetics and RJ45 socket.
  • One serial (TTL) port (TX, RX, RTS, CTS, DTR, DSR).
  • Four built-in LEDs display status information.
  • Internal firmware is upgradeable through the serial port or network.
  • EM202-SK Starter Kit available.
  • CE- and FCC-approved.

Serial-to-Ethernet Converter Features

  • All serial port lines can be used as remotely controlled I/O.
  • Full- or half-duplex operation for serial (TTL) port*.
  • 8KB routing buffers (x2, one in each direction).
  • Onboard EEPROM stores numerous user-definable functioning parameters (Settings).
  • Setup through the serial port or network (UDP commands or "Telnet" TCP session).
  • Over-the-network IP address configuration is also supported.
  • Specialized "on-the-fly" commands for serial port control.
  • "Modem" commands to control network connections; status commands for remote monitoring, etc.
  • Direct control of ADSL modems.
  • Supported network protocols include UDP, TCP, ARP, ICMP (PING), DHCP, PPPoE, and LCP.
  • Supplied with the Device Server Toolkit (DST) for Windows. The DST includes Virtual Serial Port Driver (VSPD) , a.k.a. "COM redirector". LINUX version of the VSPD is also available.
  • Works with the AggreGate system.

BASIC-programmable Controller Features

  • Executes your application written in Tibbo BASIC.
  • Absolute flexibility - think of your device as a miniature computing platform.
  • Supplied with TIDE -- a comprehensive development environment featuring seamless cross-debugging.
  • Integrated web server (HTTP) with dynamic content generation.
  • Numerous high-level objects speed up and simplify coding. Available objects include:
    • Sock- up to 16 simultaneous TCP or UDP connections;
    • Ser- UART communications;
    • Io- control serial port lines;
    • Stor- read to and write from the EEPROM;
    • Romfile- add static (ROM) data to your project;
    • And more...
  • Learn about programming with Tibbo BASIC here.

EM202 Embedded Ethernet Module
Compare our Ethernet Modules


Order
EM202
now!
Download
Device Server Toolkit
software
Works with
AggreGate
Learn about
Tibbo BASIC
* Full-duplex mode is suitable for RS232 and RS422 comms., half-duplex mode- for RS485 comms. RS232/422/485 transceivers are not built in.



Copyright Tibbo Technology Inc. 2001 - 2009   Tel: 886-2-26925443   E-mail: sales@tibbo.com | Site Map