|
External devices [compare]:
Boards:
Internal Modules [compare]:
Software:
Kits and Accessories:
|
 |
|
|
|
|
|
 |
|
Kits and Accessories
DS1000-KIT Starter Kit
This Kits contains all necessary accessories for fast and convenient evaluation of the
DS1000 BASIC-programmable Industrial Controller:
|
DS1000 BASIC-programmable Industrial Controller
|
DS202-KIT Starter Kit
This Kits contains all necessary accessories for fast and convenient evaluation of the
DS202 Serial Device Server:
|
DS202 Device Server
|
DS100R-KIT and DS100B-KIT Starter Kits
These Kits contain all necessary accessories for fast and convenient evaluation of the
DS100R and
DS100B Serial Device Servers:
* Supplied with EM100B-SK only
|
DS100R/B Device Server
|
EM1202-SK Starter Kit
This Kits contains all necessary parts for fast and convenient evaluation of the
EM1202 Ethernet Module and/or
EM1202-EV Board:
* The EM1202 and RJ1202 are soldered into the board.
|
EM1202-EV Board
|
EM1000-SK Starter Kit
This Kit contains all necessary accessories for fast and convenient evaluation of the
EM1000 BASIC-programmable Ethernet Module in the 4-port serial device server
application:
* The EM1000 module is not a part of the EM1000-EV board. If you order the EM1000-EV separately you also need to order the EM1000.
|
EM1000-EV Board
|
EM202-SK Starter Kit
This Kits contains all necessary accessories for fast and convenient evaluation of the
EM202 Ethernet Module and/or
EM202-EV Board:
** The EM202 is soldered into the Board and cannot be removed. Order another EM202 separately if you wish to test it in your own board
|
EM202-EV-RS Board
|
EM200-SK and EM120-SK Starter Kits
These Kits contain all necessary accessories for fast and convenient evaluation of the
EM200 and
EM120 Ethernet Modules:
* This Board can accept both EM120 and EM200 Modules (one at a time). The Module is plugged into a socked and can be removed.
The Board can be ordered separately as EM120/EM200-EV
|
EM120/200-EV Board
|
EM100-SK Starter Kit
This Kit contains all necessary accessories for fast and convenient evaluation of the
EM100 Ethernet Module:
* The Module is plugged into a socked and can be removed.
The Board can be ordered separately as EM100-EV
|
EM100-EV Board
|
WiFi External Antenna
WiFi Internal Antenna Cable
This internal cable combined with the WiFi External Antenna forms the complete WiFi antenna that can connect to our WA1000 and EM1000W modules.
|
WiFi Internal Antenna Cable
|
WAS-P0004(B) DS-to-device serial cable
This DB9M-to-DB9F cable is used to connect Tibbo Device Server (Board) to a serial port of your serial device.
Click here for cable wiring data.
Note: WAS-P004(B) supersedes WAS-1404 cable.
|
WAS-P0004 DS-to-device serial cable
|
WAS-P0005(B) DS-to-PC serial cable
This DB9F-to-DB9F cable is used to connect Tibbo Device Server (Board) to a COM port of your PC.
Click here for cable wiring data.
Note: WAS-P005(B) supersedes WAS-1455 cable.
|
WAS-P0005 DS-to-PC serial cable
|
WAS-1499 straight Ethernet cable
This cable is used to connect Tibbo Device Server (Board) to an Ethernet hub (switch).
Click here for cable wiring data.
|
WAS-1499 Straight Ethernet Cable
|
WAS-1498 crossover Ethernet cable
This cable is used to connect Tibbo Device Server (Board) directly to another Ethernet device (bypassing the hub).
Click here for cable wiring data.
|
WAS-1498 crossover Ethernet cable
|
12VDC Power Adaptor
All Tibbo Devices and Boards require 12VDC power adaptors (500mA current rating).
| Products |
U.S. |
Europe |
U.K. |
| 12 VDC/0.5A, non-switching, 5.5mm connector |
DS100R/B
EM120/EM200-EV
EM100-EV |
APR-1014 |
APR-1015A |
APR-1018A |
| |
| 12 VDC/0.5A, switching, 3.5mm connector |
DS202 *
EM202-EV-RS *
EM202-EV-TM *
EM1000-EV
EM1202-EV |
APR-P0011 |
APR-P0012 |
APR-P0013 |
| |
| 12 VDC/1A, switching, 3.5mm connector |
| DS1000 family |
APR-P0008 |
APR-P0009 |
APR-P0010 |
* These devices were previously supplied with ARP-P0005, ARP-P0006, ARP-P0007.
|
Adaptors
|
TB100 Terminal Block Adaptor
TB100 simplifies installation and wiring of RS422 and RS485 systems. This Adaptor is a small board that plugs into the DB9M serial port connector.
The TB100 features a terminal block connector for easy wire attachment, four onboard line terminators (for TX, RX, RTS, and CTS lines)
and full-half duplex selector for RS485 communications.
Click here for TB100 documentation.
|
TB100 Terminal Block Adaptor
|
DMK100 DIN Rail/Wall Mounting Kit
DMK100 allows you to mount the DS100/DS202 on a standard DIN rail and also simplifies wall installation of these Device Servers. It is recommended to use the newer DMK1000M DIN Rail Mounting Kit for DIN rail installations for improved stability.
Click here for DMK100 documentation.
|
DMK100 DIN Rail/Wall Mounting Kit
|
DMK1000 DIN Rail Mounting Kit
|
DMK1000 offers improved stability over the DMK100 when mounting the DS100/DS202 on a standard DIN rail.
|
DMK1000 DIN Rail Mounting Kit
|
|
|
